PORSCHE 944 TURBO GAS LINES
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
With the success of our ypipe kit on the 996tt and 997tt, we did a hybrid and built this new part to work with the OEM intake on the 997.2 turbo. Airflow restrictions can always hamper performance and power and this part like any other does that as well. Our ypipe kit has smooth mandrel 3inch bends from a 4inch collector that goes to the throttlebody. For fitment reasons, we then neck down to 2.25inches to fit on the stock boost hoses. We have incorporated all fittings/sensors that are required.
Going off our original baseline using our mustang awd on 91octane and about 90f temp, the car made 455awhp and 443ft/lbs of torque. We did these test in standard mode, not sport to see the linear gains. With the addi...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2010-13
$1,199.95
Make a selection
The open architecture of this muffler allows for a deeper four-cylinder turbo tone, with plenty of whistling on tap. Coming off throttle from higher rpms exudes a chorus of snarling, gurgling and crackling letting everyone know that this car is not your average 982. + 15 hp & + 12 tq gain. - 2 x 3.5 (90 mm) round tips. - thermal insulation on piping to keep suspension components cool. Withstands up to 2,012 degrees fahrenheit (1,100 degrees celsius). - lower deeper tones than the factory exhaust with far more whistling and gurgling / crackling off throttle. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - no drone in the cabin. - "aero quip" style motorsport muffler connections t...(choose a part on the right to read more)
$2,921.60
Make a selection
Brombacher 958 Cayenne® turbo ?sound version? Sport muffler with tips.
- + 25 crank hp & + 19 crank torque*
- 2.5" tubing (63.5mm) straight through design for max. Power
- weighs 30 lbs. (14,0 kg)
- t 316 stainless steel for improved durability over t 304
- deeper tonal quality which enhances 4.8 l turbo Porsche® sound.*
- no ecu (software) programming necessary.
- will work with OEM exhaust components.
- absolutely no drone in the cabin.
- exhaust tips are included.
- does not interfere with emissions and will not trigger the check engine light.
- made in Germany.
* in conjunction with secondary bypass pipes. A sport muffler on a 958 Cayenne® turbo will only change the tonal quality not t...(choose a part on the right to read more)
General Fitment CAYENNE 2011-14
From $3,191.10
Make a selection
The open architecture of this muffler allows for a deeper four-cylinder turbo tone, with plenty of whistling on tap. Coming off throttle from higher rpms exudes a chorus of snarling, gurgling and crackling letting everyone know that this car is not your average 982. + 15 hp & + 12 tq gain. - 2 x 3.5 (90 mm) round tips. - thermal insulation on piping to keep suspension components cool. Withstands up to 2,012 degrees fahrenheit (1,100 degrees celsius). - lower deeper tones than the factory exhaust with far more whistling and gurgling / crackling off throttle. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - no drone in the cabin. - "aero quip" style motorsport muffler connections t...(choose a part on the right to read more)
$2,816.00
Make a selection
Brombacher edition valved mufflers are the perfect compromise for you and your loved ones. Rich, deep race car tones with the exhaust valve open and soft subtle, nearly stock sounds with it closed. + 17 hp & + 13 tq gain. - 2 x 3.5 (90 mm) round tips. - includes a pierburg vacuum actuated exhaust valve. - thermal insulation on piping to keep suspension components cool. Withstands up to 2,012 degrees fahrenheit (1,100 degrees celsius). - intoxicating growl at idle, partial throttle and wide open throttle with the valves open. Factory quiet with them closed! - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - "aero quip" style motorsport muffler connections to ensure a leak free exhau...(choose a part on the right to read more)
$5,309.70
Make a selection
Brombacher 997 tt (super sound version) stainless steel exhaust system
Facts:
- + 35 crank hp & + 25 crank torque (if pressure sensor is adjusted via software)**
- catalytic bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purcha...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12 911 TURBO/GT2 2007-09
$2,117.50
Make a selection
The ultimate stainless steel system for the street. Completely civilized while cruising and opens at higher rpms. Quieter than the street / clubsport versions. More low and mid-range torque. Larger primaries, larger collector, largest diameter tubing on the market. Made for mid-range and top end performance with the added beauty of 3.5" (90mm) dual exhaust tips! + 25 crank hp & +24 crank torque (on average). - 2.9 tubing (75 mm) at the widest point. Primaries are 2.5" (64mm). - 200 cell hjs "hf" trimetallic catalytic converters. - t 316 lightweight stainless steel for improved durability over t 304. - 3.5" (90 mm) dual oval, double walled polished tips included. - intoxicating growl at idle, partial thrott...(choose a part on the right to read more)
General Fitment 911 1994-98
From $10,723.61
Make a selection
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5"(90mm/80mm) tips and are made for this muffler. Kindly order bes 996 060 41s separately.
Figures:
Gen...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,947.80
Make a selection
"brombacher" 996 GT2 titanium exhaust system with 200 cells titanium tri-metal catalytics.
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- cat bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-500...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$8,712.00
Make a selection
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-5000rpm
Max. Speed - 310km/h (193mph)
Max. Rpm -...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$9,909.90
Make a selection
"brombacher" titanium exhausts are the absolute last word in exhausts for the 997 GT2.
Incredible performance and aggressive sound all in a lightweight titanium system. The system as shown increases performance 25hp and weighs just 25.5 lbs for a huge weight savings in the already heavy rear of the 911.
From the turbo flanges and catalytics (available in 100 or 200 cells), to the tailpipes (Ø 2x85mm), this entire exhaust system (excluding the cells themselves) is made entirely of titanium. The 4 chamber system design reduces the drone in the cabin while retaining a deep, throaty growl unlike other 2 chamber systems from the competition. Our system is designed using the most expensive and highest heat v...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$12,395.90
Make a selection
Moton club sport damper system Porsche 997 turbo 07+
The club sport line is designed for the serious club racer and high performance street driver. This ultimate suspension system is by for the finest quality and best handling suspension system on the market today. Featuring remote reservoirs for superior fluid temperature control, quick release hydraulic lines (on most models) for easy installation, seperate compression and rebound damper valving adjustment and height adjustable spring perches, this kit is beyond the more common coil-over systems on the market. If your driving can benefit for the ultimate in suspension tuning, then this kit is for you.
The club sport damper is double adjustable wit...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$7,168.50
Make a selection
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque (with FVD software) **
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips ar...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$4,969.80
Make a selection
Ksport procomp front big brake kit 15 in. Rotor 8 piston caliper Porsche 996 twin turbo 99-04
Ksport big brake kits provide the ultimate in stopping power for your vehicle. Integrating new brake technology into the design of the kits allows for a kit that highly reduces brake fade and continually cools and refreshes the brake pads surface under braking. These brake systems are designed for easy installation with minimal tools required (in most applications).
Ksports extreme lightweight caliper comes in differential bore configuration. It is machined from aircraft quality billet, weighs just over 5lbs. Each, and has machined in protection grooves for the bridge tubes. Aluminum pistons, high temper...(choose a part on the right to read more)
General Fitment 911 1998-05
$4,104.00
Make a selection
Ksport procomp front big brake kit 14 in. Rotor 8 piston caliper Porsche 996 twin turbo 99-04
Ksport big brake kits provide the ultimate in stopping power for your vehicle. Integrating new brake technology into the design of the kits allows for a kit that highly reduces brake fade and continually cools and refreshes the brake pads surface under braking. These brake systems are designed for easy installation with minimal tools required (in most applications).
Ksports extreme lightweight caliper comes in differential bore configuration. It is machined from aircraft quality billet, weighs just over 5lbs. Each, and has machined in protection grooves for the bridge tubes. Aluminum pistons, high temperat...(choose a part on the right to read more)
General Fitment 911 1998-05
$2,693.25
Make a selection
Ksport procomp front big brake kit 16 in. Rotor 8 piston caliper Porsche 996 twin turbo 99-04
Ksport big brake kits provide the ultimate in stopping power for your vehicle. Integrating new brake technology into the design of the kits allows for a kit that highly reduces brake fade and continually cools and refreshes the brake pads surface under braking. These brake systems are designed for easy installation with minimal tools required (in most applications).
Ksports extreme lightweight caliper comes in differential bore configuration. It is machined from aircraft quality billet, weighs just over 5lbs. Each, and has machined in protection grooves for the bridge tubes. Aluminum pistons, high temperat...(choose a part on the right to read more)
General Fitment 911 1998-05
$4,873.50
Make a selection
Fabspeed is one of the top fabricators of aftermarket parts. With the introduction of Porsches new production line model of the 997.2 turbo it was short after that manufactures such as fabspeed to take this new model into unseen performance. The supersport muffler duel tip x-pipe with 200 cell sportcats is made from high quality 14-16 gauge, high quality 2.75"/70mm t304 stainless steel, c.n.c. Mandrel bent tubing for maximum power and sports car sound.
Key features:
Fits all 997.2 turbo vehicles 2010+
General Fitment 911 2009-12
$5,624.30
Make a selection
Product details:
Complete high-performance exhaust & intake solution for the 911 turbo 930; includes dual outlet muffler with dual or quad style deluxe tips, sport headers with heat and air intake system.
Includes:
-911 turbo (930) dual outlet muffler (incl. Deluxe dual or quad style tips)
-911 turbo (930) sport headers with heat
-911 turbo (930) air intake system
Features:
-fits all Porsche 911 turbo 930 vehicles (1976-1989)
-increases horsepower and torque by 46 whp and 33 ft-lbs
-dramatically improves sports car sound with a deeper exhaust note.
-constructed from t304 stainless steel, 14-16 gauge c.n.c. Mandrel bent high v...(choose a part on the right to read more)
General Fitment 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
From $4,050.00
Make a selection
Purchase disclaimer: fabspeed motorsport does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Fabspeed motorsport will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 cfr section 86.1854.12(a)(3), clean air act 40 cfr 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls.
The 2020 Porsche 911 Carrera is the next generation of Porsche flat-six twin turbocharged engines that have been further developed and are more powerful than ever before. ...(choose a part on the right to read more)
$3,695.95
Make a selection
Product details:
Replaces the restrictive factory catalytic converters with much less restrictive straight-through pipes for maximum flow and performance
Features:
-fits all Porsche 958 Cayenne turbo/ turbo s vehicles (2011+)
-adds 17 wheel horsepower increasing throttle response
-fabspeed’s secondary cat bypass pipes replace the restrictive factory catalytic converters with much less restrictive straight-through pipes for maximum flow and performance.
-direct bolt-on replacement for the heavy factory catalytic converters
-adds an aggressive exhaust note for exotic high-performance sound
-constructed from polished t304l stainless stee...(choose a part on the right to read more)
General Fitment CAYENNE 2011-14
From $795.00
Make a selection
Product details:
Direct replacement for restrictive factory headers; optimized for increased flow and quicker turbo spool
Features:
-fits all 911 turbo 930 vehicles (1976-1989)
-improves power delivery much sooner in the rpm range compared tot he restrictive OEM heat exchangers
-constructed from 14-16 gauge, c.n.c. Mandrel bent t304 stainless steel with high velocity 3-in-1 pyramidal investment cast merge collector for improved exhaust scavenging.
-this system will include a drip accumulator with double swivels and aeroquip lines with adapters and a graphite steel layered gasket for the drip accumulator.
-7/8” ...(choose a part on the right to read more)
General Fitment 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94
$3,136.25
Make a selection
Billy boat performance exhaust continues to deliver unsurpassed quality in craftsmanship in its products, offering true hand built quality for your Porsche. This system is the reality of a turbo owner's dream. B&b's complete turbo exhaust system all but eliminates notorious 930 turbo lag making this great machine noticeably more responsive. Their exhaust kit consists of hand built t321 stainless steel headers, with or without, heat exchangers and a t304 stainless steel high performance muffler. Also included is a turbo oil accumulator, oil scavenging line and all necessary hardware, gaskets and accessories to make for a clean bolt-on installation. Billy boat performance exhaust has a deep commitment to build ...(choose a part on the right to read more)
General Fitment 930 1975-77
$4,695.57
Make a selection
Turbo customers looking to increase engine power without pushing the motorsport envelope to redline would best benefit from the 74mm ipd turbo plenum.
This version of the 997 turbo plenum utilizes the factory 74mm throttle body and delivers impressive performance gains for both stock and slightly modified turbos with exhaust and software. Beyond these performance mods we recommend upgrading to the larger 82mm ipd turbo plenum.
The 74mm ipd turbo plenum is also designed to perform with the higher flowing ipd “y” pipe, part number ripd97274.
Installation is relatively easy and straight forward for mechanically inclined diy customers although ipd strongly recommends having a qualified Porsche technici...(choose a part on the right to read more)
General Fitment 911 2005-08
Spec stage 2+ clutch Porsche 964 3.3l turbo 97-92
What good is more horsepower if it isn_t transferred to the ground? The clutch is the main link between the power your engine produces and the transmission, but all too often it is also the weak link. Many stock clutches simply will not last under harsh driving conditions or continual hard launches. When a car is making more horsepower than stock the factory clutch is under even more strain. This can cause premature clutch wear and costly repair bills. Spec clutch solves this problem with their line of performance clutches. With increased surface area spec clutches give your transmission more _bite_ while increasing reliability and performance.
Ap...(choose a part on the right to read more)
General Fitment 911 1989-94 911 1994-98
From $969.95
Make a selection
These wide body carbon & kevlar® fenders are 1 inch (25mm) wider than the factory fenders. They are perfect for the street or track and are designed to work with the factory bumper, inner fender liner and gas filler door.
- German made
- 1 inch wider than the OEM fender
- high quality
- weight 5.5 lbs. (2.5 kg) kevlar and carbon mix for added stiffness.
- primed for paint.
Fits: GT3 rsr, 3.8l, 342kw (07-10), GT3 cup 3.6l (05-07), GT3 rs, 3.6l, 305kw (07-09), GT3, GT2 (08-09), turbo (07-09), Carrera 4s, 283kw (09-), Carrera 4, 254kw (09-), Carrera s, Carrera, 261kw (05-08), 239kw (05-08)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08
$2,003.97
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|